Which Heating System Is Right for My Home?

If you're thinking about replacing your boiler, you've probably come across terms like combi, system boiler and conventional boiler and wondered what the difference actually is. Here's a straightforward guide to help you understand each type and figure out which one suits your home best.
Combination Boiler (Combi)
A combi boiler is the most popular type in the UK and for good reason. It heats water directly from the mains on demand, meaning there's no need for a separate hot water cylinder or a cold water tank in the loft.
How it works: When you turn on a hot tap, the boiler fires up and heats the water instantly as it flows through. Central heating works in the same way - the boiler heats water and pumps it around your radiators.
Best for:
Smaller homes and flats
Properties with one bathroom
Homes where loft or airing cupboard space is limited
Anyone wanting a simple, compact system
Things to consider:
Flow rate can drop if multiple hot taps or showers are running at the same time
Not ideal for homes with high hot water demand
Relies on good mains water pressure - low pressure properties can struggle
System Boiler
A system boiler runs a sealed, pressurised central heating system with the pump and expansion vessel built into the boiler itself. This means there's no need for a feed and expansion tank in the loft, unlike a conventional system. It does still work alongside a hot water storage cylinder for your hot water supply.
How it works: Because the system is pressurised and self-contained, it's a cleaner and more efficient setup than a conventional boiler. Hot water is stored in a cylinder so multiple taps and showers can run simultaneously without a drop in pressure.
Best for:
Medium to large homes with more than one bathroom
Families with high hot water demand
Properties where multiple showers might be used at the same time
Homes that want a pressurised heating system without the need for a loft tank
Things to consider:
You still need space for a hot water cylinder
Hot water can run out if demand is very high, though a well-sized cylinder usually prevents this
More compact and neater than a conventional system as the key components are built into the boiler
Conventional Boiler (Heat Only)
A conventional boiler, sometimes called a heat only or regular boiler, is the traditional type found in older properties. It works with both a hot water cylinder and a cold water feed and expansion tank, usually located in the loft.
How it works: The feed and expansion tank in the loft feeds the system and the boiler heats water that is stored in the cylinder, ready to use when needed. The system is open and vented, meaning it operates at low pressure rather than mains pressure.
Best for:
Older properties that already have the existing setup in place
Homes with multiple bathrooms and high hot water demand
Properties with low mains water pressure, as the system relies on gravity feed rather than mains pressure
Homes where the existing pipework is designed around this type of system
Things to consider:
Takes up the most space of the three due to the cylinder and loft tank
Hot water can run out and takes time to reheat
Not as energy efficient as modern combi or system boilers
Can be costly to replace or upgrade due to the number of components involved
Unvented Hot Water Cylinder
An unvented cylinder is a sealed, pressurised hot water storage system fed directly from the mains. Unlike a vented cylinder which relies on a cold water tank in the loft, an unvented cylinder delivers hot water at mains pressure, meaning powerful showers and consistent flow throughout the house without needing a pump.
How it works: Cold water enters the cylinder directly from the mains under pressure. The cylinder is heated either by your boiler (indirect) or by an electric immersion heater (direct). Because the system is sealed and pressurised, hot water is delivered at mains pressure to every outlet in the house.
Best for:
Homes with good mains water pressure wanting powerful hot water throughout
Properties with multiple bathrooms where consistent pressure at every outlet matters
Anyone wanting to remove the cold water tank from the loft entirely
Pairing with a heat only or system boiler for a full mains pressure setup
Things to consider:
Installation must be carried out by a qualified engineer as unvented systems are subject to Building Regulations
Requires good incoming mains pressure and flow rate to work effectively
Takes up similar space to a standard cylinder
Regular servicing is recommended to keep the safety components in good working order
So Which One Should I Choose?
Here's a simple way to think about it:
One bedroom flat or small house with one bathroom? A combi is almost certainly your best option. It's compact, efficient and there's no need for any additional storage.
Family home with two or more bathrooms but limited loft space? A system boiler paired with a well-sized cylinder is usually the better choice. You get a pressurised heating system without the need for a loft tank.
Older property with an existing conventional system and multiple bathrooms? It may make more sense to stick with a conventional setup or upgrade to a system boiler rather than replumb the whole house for a combi.
Want mains pressure hot water throughout the house? An unvented cylinder paired with either a system or heat only boiler gives you powerful hot water at every outlet without the need for pumps or a loft tank.
Low mains water pressure? A conventional system with a vented cylinder fed from a loft tank is likely to serve you better than a combi or unvented setup, as both of those rely on good incoming mains pressure.
Every home is different, and the right choice depends on your property, your hot water usage and your existing pipework. If you're unsure which system would work best for you, feel free to get in touch and I'll be happy to advise - with no obligation and no call-out charge.
Nic Hall is a Gas Safe registered engineer based in Stowmarket, covering the surrounding areas of Suffolk. To book a boiler service, request a quote or just ask a question, visit the contact page.